There is a big guy in the iron remover: pipe iron remover. Many people do not know how to maintain this big guy, today on this issue here, a brief description of the pipeline iron removal maintenance.

1、首先我们开机之前要先检查一下口盖，检查除铁器内部的出铁口有没有比较大的残余件，开机之前必要要清理干净才能开机。

1, we should first check prior to the start of a cover, check separator taphole has no residual relatively large, need to clean up before the boot to boot.

2、一般如果工作的时候机子出现了故障，生产线又暂时不能停机，那么可以关掉本机电源，然后去掉卡住的铁块。（非专业人员不得擅自打开机盖。）

2, when the machine fails, production line can not stop, you can turn off the power of this machine, then remove the iron stuck. (non professionals should not open the lid without permission.)

3、每个班次，需要清理减速电机上面的灰尘。并且每半年给减速电机加润滑油。

3, every shift, need to clean up the deceleration motor dust. And add lubricating oil to the deceleration motor every half a year.

4、机侧链轮盖内毡条和大链轮下毡圈为保证机箱密封和有效呼吸所设，检修时不可损坏；毡圈经长期使用磨损后应及时更换。

4, the machine side chain and sprocket cover blankets large felt ring set in order to ensure the sealing case and effective breathing, damage can not be felt by long-term maintenance; wear should be replaced after.

对于这个大块头来说，我们主要解说的就是以上四点了。但是并不全面，一台前人经过了无数的实验设计出来的机器，并非我们三言两语就能剖析的。在使用我们的管道除铁器的客户如果需要更多的去了解这台机器，可以来我司或致电与我们的技术人员交流。

For the big guy, the main thing we're talking about is four points. But a person is not comprehensive, after numerous experiments of machine design, we can not in two words or three analysis. Customers who use our pipeline iron remover, if they need more understanding of this machine, can come to our company or call to communicate with our technical staff